Skip to content


Type: Electric (On/Off, Modulating, Spring Return), Pneumatic (Single Acting, Double Acting, Battery Backup, Rack & Pinion, Scotch Yoke, Diaphragm)
Torque: 25 – 58,000 in-lbs
Controls: Gear Overrides, Lockout Modules, Positioners, Solenoid Valves, Switches
Housing Materials: Anodized Aluminum, Cast Aluminum, Ductile Iron, Stainless Steel, Teflon Coated


Valve Sizes: 1/4” – 14”
Body Materials: 316 SS, Alloy 20, Carbon Steel, Ceramic Lined, Hastelloy, Monel, PFA Teflon Lined, Titanium
Seat Material: PEEK, PTFE, PTFE-Conductive, PTFE Glass Reinforced, RTFE, Stellite, TFM (Modified PTFE)
Configuration: 1 Piece, 2 Piece, 3 Piece, Full Port, Reduced Port, Standard Port, Wafer
End Connections: Butt Weld, Clamp, Flanged, NPT, Sanitary Tri-Clamp, Socket Weld, Threaded
Pressure: Class 150, Class 300, Class 600, Class 900, Class 1500, PN 10, PN 16


Valve Sizes: 2” – 108”
Body Materials: 316 SS, AL6XN, Alloy 20, Aluminum Bronze, Cast Iron, Carbon Steels, Chrome Moly, Ductile Iron, Duplex SS, Hastelloy, Titanium, Others Available Upon Request
Seat Materials: 316L, Alloys, Fire-Flow, Inconel, Rubber, Metals, PFA, Polyethylene, PTFE, RTFE, Stellite Overlay, TFE
Configuration: Double Offset, Single Offset, Triple Offset
End Connections: Butt Weld, Flanged, Lugged, Wafer
Pressure: Class 150 – 600, PN 10 to 40


Valve Sizes: ½” – 88”
Body Materials: All Alloys, Butt Weld, Cast Iron, Carbon Steel, Ductile Iron, Duplex Stainless Steel, Insert, Lug, Socket Weld, Solid PTFE, Stainless Steels, Wafer, WCB Cast Steel
Seat Materials: Buna-N, EPDM, Kalrez, Metal, Neoprene, Stellite, Teflon, Viton-B
Configurations: Ball Check, Cartridge Check, Double Door Check, Swing Check, Piston Check
End Connections: Flanged, Extended Body Style, Hub-End , Lug, Wafer, Raised Face, Plain Face, Retainer less, Ring Joint, Weld-End
Pressure: Class 125 – Class 2500


Valve Sizes: ½” – 10”
Body Materials: 314 SS, Alloy, CPVC, Plastic Lined, PP, PVC, PVDF, Rubber Lined
Diaphragm Materials: Buna, EPDM, Hypalon, Natural Rubber, Neoprene, Viton, Teflon/PTFE
End Connections: Butt Fusion, Flanged, Spigot, Threaded, True Union Socket


Valve Sizes: 2” – 144”
Body Material: 304 SS, 316L Stainless, Alloy 20, Carbon Steel, Chrome Moly, Duplex, Hastelloy
Body Type & End Connections: Butt Weld, Flanged, Flat Face Flange, Raised Face Flange, Ring Joint, Type Joint Flange, Wafer
Configurations: Flanged, Knife Gate, Non-Rising Stem, Rising Stem


Valve Sizes: 1/8” – 10”
Body Materials: Alloy 20, Bronze, Carbon Steel, Cast Iron, Ductile Iron, Duplex, Forged Steel, Hastelloy, Stainless Steel
Disc Materials: Buna-N, PTFE
Seat Materials: Trim 1 – 18
End Connections: Butt Weld, Flanged, Raised Face Flanged, Socket Weld, Threaded
Pressure: 125 PSI – 2500 PSI


Type: Electo-Pneumatic Positioner, Filter Regulator, Limit Switch, Pneumatic Positioner, Solenoid Valve, Transducer


Chainwheel Operator, Declutchable Manual Override, Lockout Module, Manual Gear Operator


Valve Sizes: ½” – 24”
Body Material: Carbon Steel, Ductile Iron, GRPFA, PFA, PPL, PTFE, PVDF, Stainless Steel
Seating Material: PFA, PFA-conductive, PTFE, TFM
Configurations: Fully Lined, Mach 1, Marathon Stem Seal, Severe Service, Sleeved
End Connections: Butt Weld, Compression Tube Fittings, Female NPT, Flanged, Flared, Hose Barb, Male NPT, PFA Buttweld, Screwed, Socket Weld, Threaded, True-Union
Pressure: Class 150, Class 300, Class 600


Valve Sizes: 1” – 4”
Body Materials: Alloy 20, Ductile Iron, Hastelloy, PFA Lined, Stainless Steel
End Connections: Flanged & Wafer
Pressure: Class 150 – Class 600